Dark Light
,

Arduino Basics Kit For It Lab Punjab Government Eproc.punjab.gov.pk

Compare

8,000

  

This is Arduino Basic Kit price for punjab government order. here are list of  required products. 

ARDUINO BASICS KIT
Sr. Item(s) Image Item Details Qty
1 Arduino UNO R3 Microcontroller ATmega328P DIP ATMEGA32u4 USB Convertor Operating Voltage        5V
Input Voltage 7-12V
Input Voltage (limit)        6-20V Digital I/O Pins 14
PWM Digital I/O Pins 6 Analog Input Pins        6
Flash Memory        32 KB (ATmega328P) of which
0.5 KB used by bootloader SRAM        2 KB (ATmega328P) EEPROM        1 KB
Clock Speed        16 MHz LED_BUILTIN        13
1
2 Arduino Cable USB 2.0 Cable Type A/B Shielded
Heavy Duty
Connect Arduino Uno or any board with the USB female A port of your computer.
1
3 Arduino UNO Case Arduino Uno Enclosure – Clear Plastic
The enclosure provides slots to access each header, USB port, power jack, the reset button,  AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots.
All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design.
1
4 Power Adaptor High quality switching ‘wall wart’ AC to DC 9V 1000mA wall power supply manufactured specifically for Electronics. These are switch mode power supplies which mean the output is regulated to 9V  and the capable output current is much higher (1000mA!).
These will power most projects that don’t require more than 1000mA of current.
Works with most devices that use a 9V adaptor and
less than 1A of power.
1
5 Prototyping Board  

Bitmap Bitmap Bitmap Bitmap Model: MB-102
Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strip, 200 tie-point distribution strips) Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Wire size: Suitable for 20~29 AWG (0.3mm~0.8mm) wires
1

 

6 LED Red 5mm 5mm Diffused
1.8-2.2VDC  forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd
5
7 LED Green 5mm 5mm Diffused
1.8-2.2VDC  forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd
5
8 LED Blue 5mm 5mm Diffused
1.8-2.2VDC  forward drop Max current: 20mA
Suggested using current: 16-18mA Luminous Intensity: 150-200 mcd
5
9 RESISTOR 220R (10 Pcs
Pack)
220 Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms
1
10 RESISTOR 1K  (10 Pcs
Pack)
1 kilo Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms
1
11 RESISTOR 10K  (10 Pcs
Pack)
10 kilo Ohm Resistance 10pcs pack
1/4 Watt PTH
Thick Leads Tolerance: +/-5 ohms
1
12 Jumper Wire: Male to Male Bundle
65 Pcs
65 Pcs Pack Length:
25 cm x 4 Pcs
20 cm x 4 Pcs
15 cm x 8 Pcs
10 cm x 49 Pcs
0.1″ male header contacts on both ends
Standard 0.1″ (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)
1
13 Jumper Wire: Male to Female strip 10 Pcs 10 Pcs Pack Length: 30cm
0.1″ Female header contacts on one end, 0.1″ male header contacts on other end
Standard 0.1″ (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)
1
14 Potentiometer 50k 1x Rotary Potentiometer –  50k Ohm, Logarithmic 1x Mounting Nut
1x Washer
Electrical Characteristics Taper: Linear, audio
Standard Resistance Range: 1K  –  10K  ohms Standard Resistance Tolerance: ±20 % Residual Resistance: 1 % max.
Environmental Characteristics
Operating Temperature …-10 °C  to +50 °C  Power Rating Linear: 0.2 watt
Dual Section: 0.125 watt Audio: 0.1 watt
Dual Section: 0.06 watt Maximum Operating Voltage Linear : 200 V
Audio: 150 V
Sliding Noise: 47 mV max
1

 

15 Active Buzzer Rated  Voltage: 6V DC Operating Voltage: 4-8V DC Rated  current: <30mA
Sound  Type: Continuous Beep Resonant Frequency: ~2300  Hz Small and  neat sealed  package Breadboard  and  Perf board  friendly
1
16 74HC595N 8-Bit Serial-In,  Parallel-Out Shift
Wide Operating Voltage Range of 2  V to  6V High-Current 3-State
Outputs Can Drive Up  To  15  LSTTL Loads Low Power Consumption,  80-µA Max ICC Typical tpd  =  14  ns   ±6-mA
Output Drive at 5  V
Low Input Current of 1  µA Max Shift Register Has Direct Clear
1
17 IR Reciever Module Bitmap Bitmap Bitmap Infrared  sensor receiver module KY-022 Specifications:
Infrared  remote control distance: more than 8  meters Launch tube infrared  wavelength: 940Nm
Crystal frequency: 455KHZ crystal Carrier frequency: 38KHZ
Encoding: encoding format for the NEC Size: 86  *  40  *  6mm
Power: CR2025/1600mAH
1
18 Temprature/Fla me Sensor Bitmap Bitmap Bitmap Bitmap KY-013
Analog Temperature Sensor module consist of a NTC  thermistor and  a 10  kΩ  resistor.  The resistance of the thermistor varies with surrounding temperature
1
19 Tilt switch module KY-020
Tilt Switch consists of a 10kΩ  resistor and  a metallic ball switch with bidirectional conduction that will open/close the circuit depending on its tilt degree.  It does not measure tilt angle.
1
20 LDR 5mm LDR (Light Dependant Resistor) Diameter : 5mm
No.  of Pins : 2
Type of Mounting : PCB Through Hole Maximum Operating Temperature : +800C (Approx.)
Dark  resistance:1-20M ohm Voltage,  ac or dc peak: 100V Current: 5mA
Operating temperature range: -25°C  +75°C
2
21 Button Switch with Cap With Button Cap Dimensions: 12  mm General Tolerance:
X.X=±0.4      X.XX=±0.25
Rating 50mA @  12VDC   5. Operating Force: 160  `50  gms Travel: 0.35mm ±0.1
Contactless Resistance: 100  mOhms Mechanical/Electrical Life 200,000  cycles/Min. Insulation Resistance: 100M OHMS  Min.  at 500VAC
Dielectric Strength: 250VAC  For 1  Min 2002/95/EC  (ROHS) Compliant
4
22 1X IR remote control Remote control distance: more than 8  meters   Launch tube infrared  wavelength: 940Nm   Crystal: the oscillation frequency of 455  KHz   IR carrier frequency: 38KHz
Encoding: the encoding format of the NEC,  upd6122 encoding scheme,  the user code 00FF,  key coding below picture
Size: 86  *  40  *  6mm Frequency: 38K
Power supply: CR2025/160mAH
Button: free height is less than 3mm,  the force 200- 350g,  the life of more than 200,000  button presses
1

 

23 Four  digital tube This  is  a  high  quality,  4-digit  7-segment  display  –  red in  color.  It  has  a  common  cathode.  The  display features  one  decimal point  per  digit,  and  individually controllable  apostrophe  and  colon  points.
The  LEDs  have  a  forward  voltage  of 2.1VDC  and  a max  forward  current  of 20mA.  The  hardware interface  is  sixteen  (two  rows  of eight)  through-hole pins.
Dimensions:
Overall Display: 40.18  x  12.8  mm (1.58  x  0.50″) Digit  Height: 10mm (0.39″)
1
24 One  digital tube Common  Cathode,  14.2mm,  Red Digit  Size: 14.2mm x  8.1mm
Current  consumption  : 30mA  /  segment Peak  current  : 70mA
Reverse  Voltage: 3V
Operating  Temperature: -25°C  to  +85°C
1
25 5V  Stepper motor
with  ULN2003 Driver  Module
28BYJ-48
With  Driver  Module  ULN2003
64  steps  per  rotation  (5.625  degrees  per  step) Diameter: 28mm
Length: 274mm
Shaft  Size: 5mm diameter  x  8mm long  Mounting  Hole  Distance: 32mm center  to  center Mount  Hole  Diameter: 4mm
1
26 Servo  MG90S Servo  MG90S  (Metal gear) Maximum Rotation: 0°  –  180° Weight: 13.4g
Dimension: 22.8×12.2×28.5mm
Stall torque: 1.8kg/cm (4.8V);  2.2kg/cm (6.6V) Operating  speed: 0.10sec/60  degree  (4.8V); 0.08sec/60  degree  (6.0V)
Operating  voltage: 4.8V Temperature  range: 0  °C  -55  °C Dead  band  width: 1us
Power  Supply: Through  External Adapter servo  wire  length: 25  cm
Servo  Plug: JR  (Fits  JR  and  Futaba)
3  Servo  Plastic  Arms  &  3  screws  included
1
27 LCD1602  IIC I2C 16×2  Blue,  Backlight
I2C  breakout  Module  for  LCD  (soldered)
LED  is  16-Character    2-Line,  blue    Screen    and white    Character  (STN  Negative  Blue)
Be  I2C-Bus    Interface  that  can  connect  8  devices together  in  the  same  bus  (setup  different  Address) Supply  voltage: 5V
Interface:I2C/TWI  x1,Gadgeteer  interface  x2 Adjustable  contrast
Size: 80x36x20mmz(3.1×1.4×0.7in)
1
28 DHT11  Digital Temperature and  Humidity Sensor KY-015
Operating  Voltage: 3.5V  to  5.5V
Operating  current: 0.3mA  (measuring)  60uA (standby)
Output: Serial data
Temperature  Range: 0°C  to  50°C Humidity  Range: 20%  to  90%
Resolution: Temperature  and  Humidity  both  are  16- bit
Accuracy: ±1°C  and  ±1%
1
29 Water  level measurement module Water  sensor  brick  is  designed  for  water  detection, which  can  be  widely  used  in  sensing  the  rainfall,  water level,  even  the  liquate  leakage.  The  brick  is  mainly comprised  of three  parts: An  Electronic  brick connector,  a  1  M  resistor,  and  several lines  of bare conducting  wires. 1
30 RFID  module MFRC-522 RFID  Card  Inductive  Module  with  Key  Chain Specifications:
Current  :13-26mA  /  DC  3.3V  Idle  Current  :10-13mA  /  DC  3.3V Sleep  current: <80uA
Peak  current: <30mA
Operating  Frequency: 13.56MHz
Supported  card  types: S50,  S70,  UltraLight,  Pro, Desfire
Product  Physical Characteristics: Dimensions: 40mm ×  60mm
Environmental Operating  temperature: -20-80 degrees  Celsius
Environment  Storage  temperature: -40-85  degrees Celsius
Relative  Humidity: 5%  -95%
Data  Transfer  Rate: Max.  10Mbit  /  s
Package  Included:
1  X  RFID-RC522  module  one; 1  X  Standard  S50  Blank  Card;
1  X  S50  shaped  cards  one  (as  shown  keychain shape);
1  X  Straight  row  pin
1
31 SOUND MODULE KY  037
High  Sensitivity  microphone  sound  sensor  module
Features:
Mounting  screw  hole  3mm 5V  DC  power  supply Analog  output
Threshold  level output  flip High  sensitive  microphone Power  indicator  light
Comparator  output  is  light
1

 

32 Single  Channel Relay module 5V  Relay interface  board,
Equiped  with high-current  relay,  AC250V  10A  ; DC30V  10A
Standard  interface  that  can be  controlled  directly by microcontroller  (Arduino  ,  8051,  AVR,  PIC,  DSP, ARM,  ARM,  MSP430,  TTL  logic)
Comes  with on board  LED  Indicator
1
33 RTC  Module PCB  a  single  panel,  size: 42mm *  24mm * 12mm(max)
Colour: green (as  the  picture  shows) with 4  holes,  about  3.1mm in diameter
genuine  spare  battery for  the  celestial sphere CR2032,  Voltage  3V,  current  is  260mAh,  non- rechargeable  batteries.
Crystal 32.768KHz,  matching capacitance  6pF,  size 2  *  6mm
DS1302  made  large  8-pin DIP  chip,  chip,  IC  Block below  for  easy replacement  and  plug the  chip module  operating voltage  compatible  3.3V/5V,  5V and  3.3V  microcontrollers  can be  connected  with Operating temperature: 0–  70
VCC  and  GND  must  not  be  reversed,  or  it  will burn the  chip
51  MCU  P0  port  requires  a  pull-up  if your  single- chip  pull-up  resistor  is  not  connected,  you can port the  data  cable  to  the  other
1
34 4×4  Matrix Keyboard The  4×4  Keypad  features  16  push buttons  arranged
as  4×4.  It  contains  high quality pcb  with on board  16 push buttons.
1
35 RGB  Three Color  Module KY-016
5mm RGB  crystal LED
RGB  LED  module  consists  of a  plug-in full color LED  made  by R,  G,  B  three  pin PWM  voltage  input can be  adjusted  section three  primary colors (red/blue/green)  strength in order  to  achieve  full color mixing effect.  Control of the  module  with the  Arduino can be  achieved  cool lighting effects.
Features:
RGB  trichromatic  limiting resistor  to  prevent  burnout PWM  adjusted  color  mixing
Working voltage: 5V
LED  drive  mode: Common cathode  driver
1
36 Power  Supply Module  MB- 102 Breadboard  Power  Supply Module
Breadboard  power  supply module,  with 5  V,  3.3  V output  voltages
Apply to  any Standard  breadboard
Input  voltage: 6.5-12  V  (DC)  or  5V  USB  power supply
Output  voltage: 3.3V  and  5V  can switch over Maximum output  current: <700  ma
Input  voltage  ON/OFF  switch Independent  control of upper  and  Lower
BreadBoard  Power  Rails.  Can switch over  to  0  V,
3.3  V,  5  V  using jumpers  on any rail.
On-board  two  groups  of 3.3V,  5V  DC  output  plug pin,  convenient  external lead  use.
Connectors:
1x Barrel 5mm Connector  (center  +ve)  for  Input Power
1x USB  connector  for  5V  input  or  5V  output
4x 2  Pin Headers  pointing downward  for  3.3V  or  5V output  (to  get  output  using flying wires)
1x 2×4  Header  for  3.3V  and  5V  output
2x 1×4  selection jumper  for  3.3V/OFF/5V
1
37 DC  Motor with Fan / Wires Standard  DC  Motor  with soldered  Connectors Operating Temperature: -10°C  ~  +60°C Rated  Voltage: 6.0VDC
Rated  Load: 10  g*cm
No-load  Current: 70  mA  max
No-load  Speed: 9100  ±1800  rpm Loaded  Current: 250  mA  max Loaded  Speed: 4500  ±1500  rpm Starting Torque: 20  g*cm
Starting Voltage: 2.0
Stall Current: 500mA  max
Body Size: 27.5mm x 20mm x 15mm Shaft  Size: 8mm x 2mm diameter Weight: 17.5  grams
1
38 PIR  Sensor HC-SR501
The  PIR  (Passive  Infra-Red)  Sensor  is  a  pyroelectric device  that  detects  motion by measuring changes  in the  infrared  (heat)  levels  emitted  by surrounding objects.  When motion is  detected  the  PIR  Sensor outputs  a  high signal on its  output  pin.  This  logic  signal can be  read  by a  microcontroller  or  used  to  drive  an external load.  Dual output  modes  and  a  sensible design that  performs  within stated  datasheet specifications  are  a  few  reasons  over  100,000  units are  in use  around  the  world.
Electrical Parameters
Product  Type: HC–SR501  Body Sensor  Module Operating voltage  range: DC  4.5-20V
Quiescent  Current: <50uA
Level output: High 3.3  V  /Low  0V
Trigger: L  can not  be  repeated  trigger/H  can be repeated  trigger  (Default  repeated  trigger)
Delay time: 5-200S(adjustable)  the  range  is  (0.xx second  to  tens  of second)
Block  time: 2.5S(default)Can be  made  a  range(0.xx to  tens  of seconds
Board  Dimensions: 32mm*24mm Angle  Sensor: <100  °  cone  angle
Operation Temp: -15-+70  degrees
1

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

SHOPPING CART

close