Discontinued UHF RFID JRD-4035 Reader with Integrated Antenna Module for long range 1.5 meter to 2 meter in Pakistan
Compare₨8,000
This product has been discontinued because its tutorials not available and people are not enough technical to operate this product after reading datasheet.
. module is a mid-range and short-range UHF low-power embedded read-write module. The ceramic dielectric antenna is integrated with the read-write module, which completely eliminates the technology brought to the user by the need for an additional antenna for the ordinary UHF module. Uncertainty, without the need for any preliminary scheduling by the user, the module can work stably, which is true PLUG & PLAY. Simple external interface conversion can realize USB, Bluetooth, WIFI and other connection methods. The integrated design realizes the miniaturization and low cost of the module; the optimized RF design realizes the low power consumption and high performance of the module, and the transmission distance of the only 100MW can reach an effective distance of more than 1.5M
PIN definition
- GND ground
- EN high enable module (>1.5
- RXD TTL level (3.3V)
- TXD TTL level (3.3V)
- VCC power supply (3-5V)
Features:
- The label is sensitive and stable.
- The stable recognition distance is 1.5-2 meters.
- Multi-tag recognition performance: >50 labels
- Label recognition speed: >50 sheets/second.
- No external heat sink is required.
- Long-term continuous full-load operation at room temperature does not cause heat.
- Continuous current <200mA @ 3.5V (26 dBm Output).
- Peak pulse current <260mA.
- Work 24 hours x 365 days without crashing.
- The performance is affected by external influences such as the outer casing and the electromagnetic environment.
- Wide temperature design, low-temperature drift coefficient.
- A model of consistent design.
- All components of the highest grade are selected to ensure stable and consistent parameters.
Specifications:
- Sleep state current <100uA (EN pin low level)
- Operating current 180mA @ 3.5V (26 dBm Output, 25°C).
- 110mA @ 3.5V (18 dBm Output, 25°C).
- Start time <100mS.
- Operating temperature – 20 °C – + 70 °C
- Storage temperature – 20 °C – + 85 °C
- Operating humidity < 95% ( + 25 °C)
- Air Interface Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
- Working spectrum range 840-960MHZ
- Output power range 18-26 dBm
- Output power accuracy +/- 1dB
- Output power flatness +/- 0.2dB
- Receive sensitivity < -70dBm
- Inventory label peak speed > 50 sheets / sec
- Tag Cache 200 Labels @ 96 bit EPC
- Label RSSI support
- Communication Interface
- TTL Uart interface
- Communication baud rate 115200 bps (default and recommended)
- 38400bps
- Cooling method Air cooling (no external heat sink required)
Table 1: Overview of integrated antenna characteristics
product name | UHF RFID module antenna integrated |
total measurement | 40x40x8.5mm (ceramic antenna size is 35x35x4mm, pcb board size is 40x40mm) |
Application occasion | Solutions for mobile devices, handsets, tablets, small readers, fixed card readers, etc. |
support system |
Android and Windows Provide SDK package for secondary development |
|
Excellent label reading performance |
◆ Label identification is sensitive and stable. ◆ Stable recognition distance is 1.5-2 meters. (9662 white card) ◆ Multi-label recognition performance: > 50 labels. ◆ Label recognition speed: > 50 sheets / second.
|
Completely solve the problem of fever |
◆ No external cooling device is required. ◆ It can work continuously for a long time at room temperature without heating. ◆ Continuous current <200mA @ 3.5V (26 dBm Output) . ◆ Peak pulse current <260mA . |
Excellent stability |
◆ 24 hours x 365 days work without crash. ◆ Performance is less affected by external influences such as the shell and electromagnetic environment. ◆ Wide temperature design with extremely low temperature drift coefficient.
|
Excellent consistency |
◆ A model for consistent design. ◆ All the highest-level components are selected to ensure the stability and consistency of various parameters.
|
Simple and efficient software and hardware interface
|
◆ The peripheral circuit is extremely simple, single power supply, no external tantalum capacitor is needed. (See Figure 1 : Reference Design Circuit).
|
installation method |
◆ Support 5pin WAFER installation. |
Table 2: Electrical parameters
Operating Voltage |
DC 3.5V – 5 V |
Standby current |
<80mA (EN pin high level ) |
Sleep state current |
<100uA (EN pin low level ) |
Working current |
180mA @ 3.5V (26 dBm Output , 25 ° C) . 110mA @ 3.5V (18 dBm Output, 25 ° C) . |
Start Time |
<100mS . |
Operating temperature |
-20 ° C-+ 70 ° C |
storage temperature |
-20 ° C-+ 85 ° C |
Working humidity |
<95% (+ 25 ° C) |
Air interface protocol |
EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
Operating spectrum range |
840-960MHZ |
Work area support |
US, Canada and other regions following US FCC Europe and other regions following ETSI EN 302 208 Mainland China Japan Korea Malaysia Taiwan |
Output power range |
18-26 dBm |
Output power accuracy |
+/- 1dB |
Output power flatness |
+/- 0.2dB |
Receiving sensitivity |
<-70dBm |
Peak inventory speed |
> 50 sheets / second |
Tag buffer |
200 tags @ 96 bit EPC |
Label RSSI |
stand by |
Communication Interface |
TTL Uart interface |
Communication baud rate |
115200 bps (default and recommended) 38400bps |
Cooling method |
Air cooling (no external heat sink required) |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.