Name: 3V-5V RFID YHY502CG Reader Writer Module UART Interface
SKU: 3228
Availability: InStock

This contactless 3V-5V RFID YHY502CG Reader Writer UART Interface module is designed for an easy reader adaptation to a host to use this device for test and application purpose. There is need only one command to finish one action, such as read or write card data. It needs no request or selection. The module will do it for you automatically. What you need is just send one command to the module. Then it will send back what you want. Anything is just so simple and so easy. Also, if there is any card go into the rf field, the red led on the module will light and the SIG pin will change from “1” to “0” to indicate the event.

This HY502 series of RFID reader/writer modules are based on non-contact card reader ASCI chip compatible with ISO14443 standard. It uses 600nm CMOS EEPROM technology, supports ISO14443 type A protocol, and also supports the MIFARE standard encryption algorithm. The chipset integrates analogue modulation and demodulation circuits only require minimal peripheral circuits to function. The module supports UART interface. The digital circuits have dual working voltages mode, TTL and CMOS. The HY502 module is targeting water, electricity, gas meters, vending machines, access control, elevators, drinking fountains, telephone billing system or other identification card reader system applications.

Users can simply select the desired interfaces to harvest the full operation of the system and do not need to struggle with the complicated radio base station design. HY502 series supports Mifare One S50, S70, Ultra Light & Mifare Pro, FM11RF08 and other compatible cards. It can be set to automatically find cards, by default, to automatically find cards. HY502 series are low-power modules, wide-voltage 2.7 ~ 5.5V, uses an integrated module with an embedded antenna and can significantly reduce PCB size.